:::::::::::::
THE MAIN FEATURES ARE
:::::::::::::
.
High degree of brightness.
.
Free from siliceous matters and metallic impurities.
.
Ultrafine particle size distribution.
.
Improves mechanical & electrical properties
of the composite.
.
Very low moisture content.
.
Low bulk density.
::::::::::::::::
APPLICATION ::::::::::::::::
.
As an extender in mfg. of Semigloss, Full Gloss
Oil based Paints
where dispersion properties are of more
importance.
.
As a filler in general-purpose PVC & Other Thermoplastics.
.
As an economical grade of Aluminium Silicate in
Rubber Footwear's'.
.
As a filler in Toilet soap.
.
As a filler in Foam industry.
.
As a filler in surgical / pharmaceutical products.
.
As a filler in Oil Bond & Enamel Paint.
.
As a body filler & for Coating in Paper Industry.
.
As a filler in Hawai Chappal Industry.
::::::::::::::::
GRADES ::::::::::::::::
MICROFIL
- SW:
This grade has a whiteness unmatched by any other
clay available worldwide. It has low bulk-density,
plasticity & near zero grit content. It has
very high wettability, dispersibility in non-aqueous
solvents. Some of this application are in :-
PAINTS- Due to its
whiteness it is used to extend and partially replace
titanium-dioxide. The low bulk density facilitates
lower concentration per volume. Rubber Molded parts,
lining, flaps, as anti-sticking agent in thread
rubber.
PAPER-
As a body filler and for coating.CALCIUM CARBONATE
SUBSTITUTE- Due to wetness, fineness and low B.D.
it can replace ppt. CaCO3 in many applications e.g.
Hawai Footwear Straps. INSECTICIDES As a filler
in various technical formulations.
This grade is remarkable for its purity, very high
fineness, whiteness and easy dispersibility. It
conforms to I.P. standards for Kaolin due to chemical
purification and freedom from heavy metallic impurities.
it can be used as a filler/diluent in Pharmaceuticals,
Animal Feed, Food Products, Marine Food Preservation
& Cosmetics.
MICROFIL - M-IV :
This grade is remarkable for its purity, high fineness,
whiteness and easy dispersibility. It can be used
as an economical substitute of Microfil - SW in
various cost sensitive applications.
MICROFIL - M-III:
This grade is reasonably white and free from impurities
and can be used as an economical substitute of Microfil
- IV in various cost sensitive applications e.g.
Putties & Primers.
MICROFIL - M-II:
This grade is hard china clay having semi-reinforcing
properties and high plasticity due to its very small
average particle size. It is easily wettable &
dispersible in aqueous solutions and has anti setting
characteristics. It is an excellent filler for :PAINTS
Water based and emulsions.RUBBER Checks retardation
due to basic pH.PAPER as a body fille
PHYSIOCHEMICAL
PROPERTIES OF LEVIGATED CHINA CLAYS **
|
